/en/products-services/accessories /en/products-services/products

Drop Shape Analyzer

DSA30E (r01)

Versatile automated wetting and adhesion analysis of solids and liquids | Condition: Good

-25 % OFF

16.614,75 €22.153,00 €

excl. 19% VAT

1 in stock

Good choice! The item was added to your list.

View request list Continue to shop

Refurbished at the KRÜSS headquarters

Free packaging and shipping

Discount-priced

Condition: Good

 

      The instrument shows clear signs of use, e.g., noticeable scratches, visible paint abrasion, or minor impact marks.
  It is quality-approved and warrantied for 12 months. 
Drop Shape Analyzer – DSA30E for wetting and adhesion analysis

Extend of delivery

Drop Shape Analyzer - DSA30E for fully automatic, software-controlled contact angle measurements, surface and interfacial tension measurements, surface free energy calculation, consisting of:

 

  • CF04, High Resolution and High Speed Camera USB 3.0,  consisting of:  
    - Sensor 11 x 7 mm / 1/1.2'' CMOS
    - IR-CUT filter for elimination of optical disturbances
    - 160 fps (1200 x 1200 pixels), 320 fps (1200 x 600 pixels),  

       600 fps (1200 x 300 pixels), 1440 fps (1200 x 100 pixels),  

       2300 fps (1200 x 50 pixels)  

  • CM4210, Optical system with manual zoom (6.5 x) and fine focus,  
    Field of view CF04: 3.2 x 3.2 ... 18.5 x 18.5 mm 

  • DS4224, Dosing System for 4 test liquids, software-controlled,
    plus 1 manual dosing of 1 test liquid, incl. disposable syringe like SY3040,
    glass syringes SY22 and needle set NE94

  • PS3202, z-Axis Standard manual, precision z-drive with 45 mm movement, up to 5 kg t,

  • 2x PS3260, Axis for software-controlled positioning in x- or y- direction,
    max. travel distance 100 mm

  • ST3200, Standard Sample Stage, 105 x 105 mm (W x D) 

  • IL4220, High Power LED Illumination, monochromatic, Ø 42 mm,
    with two power levels and integrated light-blind for small contact angles

  • EM3285, Electronic Module with two connectors for temperature sensors Pt100 

  • FM4200, Standard Frame:
    - Sample space: 320 x oo x 275 mm (W x D x H) 
    - Outer dimensions: 610 x 250 x 610 mm (W x D x H)
    (depending on accessories)

  • EM4225, Base Electronic Module, incl. PC interface to connect additional electronic modules 

  • EM11, Power Supply (88-264 V, 100 W, 50-60 Hz) 

  • KA10, Adapter for connecting the instrument with RS232 interface to the USB port of PC 

 

Operating: + 10°C ... + 40°C without condensation  
Storage:     - 10°C ... + 70°C without condensation  

 

➤ Installation and training are not included.

Offers and prices on this website are only valid for the limited stock in the following countries: Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Liechtenstein, Luxemburg, Netherlands, Norway, Spain, Switzerland, United Kingdom.